FS-G Solar sealant
1. WARNING: UNCURED PRODUCT CAUSES IRRITATION. MAY CAUSE HEADACH, DIZZINESS, NAUSEA. Wear gloves and eye protection and remove contact lenses before using; No special first aid is required under normal circumstances, harmful if swallowed. Skin contact: Rinse immediately with copious amounts of water. Remove contaminated clothing and make sure it is cleaned before wearing it again. If irritation or other symptoms occur, seeking prompt medical attention. Eyes contact: Immediately flush with plenty of water and seek prompt medical attention. 2. KEEP OUT OF REACH Of CHILDREN 3. TYPICAL PRODUCT INFORMATION Application Temp: 32~86°F Service Temp: -58~356°F Odor: Odorless Shelf Life：9 months Made in：China
Clean and wait until the surface of the object is dry and adhered, extrude the product from the packaging tube, apply it evenly on the part, and trim it before the sealant has been vulcanized to remove excess sealant; 2. Avoid contacting with eyes during sizing, not sealed during construction and curing, and maintain a good ventilation environment; 3. After each use, it should be quickly sealed to prevent the residual sealant in the tube from being exposed to moisture in the air;
